RESEARCH LINES
TYPE OF PUBLICATION
Kinetic study on the effect of adding P2O5 to the LMAS glass-ceramic materials
The addition of P2O5 to a LMAS glass-ceramic leads to the formation of Lithium Aluminum Silicate, Enstatite and b-Spodumene crystals that grow in one, two and three-dimensions depending on the presence of F ions
Characterization of polymer-derived ceramers subjected to wet-etching and the evolution of the carbon phase during thermal conversion
At intermediate pyrolysis temperatures, Co forms labile carbides into the preceramic polymer network. Upon decomposition, Co leads to the formation of ordered carbonaceous structures. Co-carbon nano-onions (Co@CNO) appear into the silicon oxycarbide ceramers
Structural, textural and electrochemical relationships in HF etched cobalt silicon micro/mesoporous oxycarbides
For the Co-SiOC materials the electrochemical performance dependent not solely on the Co content but also to the graphitization degree of the carbonaceous phase
Amino Functionalized Micro-Mesoporous Hybrid Particles for the Sustained Release of the Antiretroviral Drug Tenofovir
Free amino groups of the silane are required to achieve a smart pH-responsive material. This is only achieved in those materials containing a silane chemisorbed monolayes
Synthesis and characterization of Ce/SiOC nanocomposites through the polymer derived ceramic method and evaluation of their catalytic activity
When the urea concentration increases less crosslinked structures are formed and the carbon crystallite size is reduced. Cerium induces an increase of the carbon size as well as the number of SiOC units. Pore anisotropy and smoothness of the surface are also dependent on the material composition
Rapid one-pot hydrothermal reaction for preparing BaCu2Si2O7 fine particles with controlled blue colour tonality
A new chemical approach has been developed for preparing BaCu2Si2O7 semi-spherical particles, free of by-products, with a 3D self-assembling process and a wide range of blue color tonalties
FT-IR study of the hydrolysis and condensation of 3-(2-amine-ethylamine)propyl-trimethoxy silane
Mucoadhesive Vaginal Discs based on Cyclodextrin and Surfactants for the Controlled Release of Antiretroviral Drugs to Prevent the Sexual Transmission of HIV
Carrageenan-Based Acyclovir Mucoadhesive Vaginal Tablets for Prevention of Genital Herpes
Influence of Fe2O3 on the structure and near‑infrared emissivity of aluminosilicate glass coatings
Glass coatings present emissivity between 0.78 – 0.80 in the near-infrared region which can be tuned by changing the Fe2O3 concentration. Different crystalline phases have been developed a 1250 C
Chitosan-Based Mucoadhesive Vaginal Tablets for Controlled Release of the Anti-HIV Drug Tenofovir
Highly micro- and mesoporous oxycarbide derived materials from HF etching of silicon oxycarbide materials
Insights into the structural and surface characteristics of microporous carbide derived carbons obtained through single and double halogen etching
The porous structure, porous anisotropy, surface fractality and surface characteristics such as defects, disorder and reactivity of the carbon edges prepared from silicon oxycarbides carbides lead to different electrical energy capacities
Application of a glass fertilizer in sustainable tomato plant crops
Preparation of nanostructured TiO2 films with high catalytic activity and their 3D spatial distribution of anatase and rutile phases
Nanostructured TiO2 films
Optimization of tenofovir release from mucoadhesive vaginal tablets by polymer combination to prevent sexual transmission of HIV
Carbon-GO Composites with Preferential Water versus Ethanol Uptakes
Development and In Vitro/Ex Vivo Characterization of Vaginal Mucoadhesive Bilayer Films Based on Ethylcellulose and Biopolymers for Vaginal Sustained Release of Tenofovir
Etylcellulose and xantan gum bilayer films lead to a high mucoadhesion and sustained Tenofovir release for 15 days and offer an interesting option for women protection against HIV sexual transmission
Vaginal Polyelectrolyte Layer-by-Layer Films Based on Chitosan Derivatives and Eudragit® S100 for pH Responsive Release of Tenofovir
Films formados por multicapas a base de quitosano y Eudragit ® S100 son sistemas muy prometedores para la liberación del antiretroviral Tenofovir para proteger a mujeres del virus del HIV
Enhanced electrical and thermal conductivities of silicon oxycarbide nanocomposites containing carbon nanofibers
Controllable Synthesis of BaCuSi2O6 Fine Particles Via a One-Pot Hydrothermal Reaction with Enhanced Violet Colour Hue
New materials in dark blue color
An interplay between electronic and structural effects on the photoluminescence decay mechanisms in LaPO4nH2O:Tb3+ and LaPO4:Tb3+single-crystal nanorods
Evaluation of thermal shock resistance of silicon oxycarbide materials for high-temperature receiver applications
Enhancing the fracture toughness of hierarchical composites through amino‒functionalised carbon nanotube webs
Novel highly oriented CNT webs towards directional multifunctionality
Structural-microstructural characterization and optical properties of Eu3+, Tb3+ -codoped LaPO4·nH2O and LaPO4 nanorods hydrothermally synthesized with microwaves
Further characterization of the surface properties of the SiC particles through complementarity of XPS and IGC-ID techniques
Processing and electrical conductivity of non-stoichiometric lanthanum strontium manganite perovskites prepared from powders synthesized by a polymerizable-complexation route
Dependence of the synthetic strategy on the thermochemical energy storage capability of CuxCo3-xO4 spinels
Evidencing early pyrochlore formation in rare-earth doped TiO2 nanocrystals: Structure sensing via VIS and NIR Er3+ light emission
Effect of Sr2+ doping on sintering behavior, microstructural development and electricalproperties of LaPO4·nH2O nanorods prepared by dry mechanical milling
Drug kinetics release from Eudragit – Tenofovir@SiOC tablets
Influence of Chitosan Swelling Behaviour on Controlled Release of Tenofovir from Mucoadhesive Vaginal Systems for Prevention of Sexual Transmission of HIV
Surface effects on the degradation mechanism of bioactive PDMS-SiO2-CaO-P2O5 hybrid materials intended for bone regeneration
Structure-property Relationships for Eu doped TiO2 Thin Films Grown by Laser Assisted Technique from Colloidal Sols
Raman Characterization and Photoluminescence Properties of La1-xTbxPO4·nH2O and La1-xTbxPO4 Phosphor Nanorods Prepared by Microwave-Assisted Hydrothermal Synthesis
Preparation, Thermal and Phase Evolution and Functional Properties Relationships of Non-stoichiometric Strontium-doped Lanthanum Manganite Perovskite Ceramics
New Glass Fertilizer for Tomato Crops to Reduce the Environmental Impact
Advanced silicon oxycarbide-carbon composites for high temperature resistant friction systems
Combined pyrolysis-ammonolysis treatment to retain C during nitridation of SiBOCN ceramics
Chemical oxidation of silicon oxycarbide ceramics for advanced drug delivery systems
Textural Characteristics, Degree of Protonation, Water Uptake and Proton Transport Relationships in Colloidal Sol-gel Derived Micro- and Mesoporous Silica Membranes
Effect of Titania Doping and Sintering Temperature on Titanium Local Environment and Electrical Conductivity of YSZ
Effect of Tb3+ Doping and Self-generated Pressure on the Crystallographic/morphological Features and Thermal Stability of LaPO4∙nH2O Single-crystal Nanorods obtained by Microwave-assisted Hydrothermal Synthesis
SiC Reinforced Glass Ceramic Matriz (LAS) Composites for Concentrated Solar Power Energy
Sustainable synthesis of N-acetyllactosamine using an immobilized b-galactosidase on a tailor made porous polymer
Covalent Immobilization of Pseudomonas stutzeri lipase on a porous polymer: an efficient biocatalyst for a scalable production of enantiopure benzoin esters under sustainable conditions
Effect of sintering time on Structural, Microstructural and Chemical Composition of Ni-doped Lanthanum Gallate Perovskites
Thermal Evolution, Second Phases, and Sintering Behavior of LaPO4.nH2O Nanorods Prepared by Two Different Chemical Synthesis Routes
Strontium and Cobalt doped-lanthanum Chromite: Characterisation of Synthesised Powders and Sintered Materials
TiO2/Eu3+ Thin Films with High Photoluminescence Emission Prepared by Electrophoretic Deposition from Nanoparticulate Sols
Structural and Photoluminescence Study of Eu3+/TiO2 Xerogels as a Function of the Temperature using Optical Techniques
Relationships between Structural and Electrical Properties in Mixed Conductors Duplex Materials in the ZrO2-Y2O3-TiO2 Ternary System
Microwave-Assisted Hydrothermal Synthesis of Single-Crystal Nanorods of Rhabdophane-Type Sr-doped LaPO4∙nH2O
TPR studies on NiO-CGO Composites Prepared by Combustion Synthesis
Synthesis and Photocatalytic Activity of Eu3+ -doped Nanoparticulate TiO2 Sols and Thermal Stability of the resulting Xerogels
Effect of the RE (RE = Eu, Er) Doping on the Structural and Textural Properties of Mesoporous TiO2 thin films Obtained by Evaporation Induced Self-assembly Method
Rare Earth-doped TiO2 Nanocrystalline Thin Films: Preparation and Thermal Stability
Deposition of carbon nanotubes onto aramid fibers using as-receivedand chemically modified fibers
Glass Hardness and Elastic Modulus Determination by Nanoindentation Using Displacement and Energy Methods
Mesoporous silicon oxycarbide materials for controlled drug delivery systems
Interactions between the glass fiber coating and oxidized carbon nanotubes
Stable highly porous silicon oxycarbide glasses from pre-ceramic hybrids
Towards standard testing materials for high temperature solar receivers
Evaluation of glass leaching as nutrient source for microalgae growth
Chitosan and Kappa-Carrageenan Vaginal Acyclovir Formulations for Prevention of Genital Herpes. In Vitro and Ex Vivo Evaluation
Effect of the surface parameters on the interaction of epoxy polymer supports with a lipase enzyme
Surface properties of bioactive TEOS–PDMS–TiO2–CaO Ormosils
Innovative and advanced materials research for high temperature solar receivers
Structure properties relationship in silicon oxycarbide glasses obtained by spark plasma sintering
Effect of processing on the structural characteristics of sintered silicon oxycarbide materials
Influence of processing conditions in TEOS/PDMS derived silicon oxycarbide materials. Part 1: Microstructure and properties
Influence of silane concentration on the silanization of multiwall carbon nanotubes
Surface and structural modification of nanostructured mesoporous silicon oxycarbide glasses obtained from preceramic hybrids aged in NH4OH
Influence of milling process in the surface energy of glass tile frits
Study and Characterization of Organically Modified Silica-Zirconia Anti-Graffiti Coatings Obtained by Sol-Gel
Characterization and properties of treated smectites
Microstructure of low temperature processed CNFs/glass nanocomposites
Crystallization mechanism of glass-ceramics prepared from Ni–Cu–Co mining wastes
Silver diffusion and coloration of soda lime and borosilicate glasses. Part 1: Effect on the transmission and coloration of stained glasses
Synthesis and characterization of boron silicon oxycarbide glass fibers
Dense bulk Silicon oxycarbide glasses obtained by Spark Plasma Sintering
Influence of the hybrid material size in silicon oxycarbide materials characteristics
Surface dispersive energy determined with IGC-ID in anti-graffiti-coated building materials
Surface Energy of Sol Gel-Derived Silicon Oxycarbide Glasses
Study of arsenopyrite weathering products in mine wastes
Characterization of surface and porous properties of synthetic hybrid lamellar silica
Analysis of the interaction of vinyl and carbonyl silanes with carbon nanofiber surfaces
Synthesis and Characterization of Silicon Oxycarbide Derived Nanocomposites Obtained Through Ceramic Processing of TEOS/PDMS Preceramic Materials
Processing and properties of carbon nanofibers reinforced epoxy powder composites
Silane Coupling Agent Structures on Carbon Nanofibers
Texture and micro-nanostructure of porous silicon oxycarbide glasses prepared from hybrid materials aged in different solvents
Effect of reaction conditions on surface properties of TEOS–TBOT–PDMS hybrid materials
Preparation and characterisation of mixed silicon oxycarbide materials
